How-to: DIY Balance Bike from a Kid’s Pedal Bike

DIY balance bike from pedal bike (2 of 4)Balance bikes are great for kids who aren’t quite ready for a “real” two-wheeler. Balance bikes teach kids how to balance, steer, and coast on a real bicycle, while being just as easy for a kid to use as a bike with training wheels attached. A balance bike is also a great confidence-builder for a nervous kid.

At least that’s why I wanted a balance bike for my kid, who, at the ripe old age of seven, had taken to claiming that she was NEVER going to learn to ride her bicycle.

Nope, too scary. She’d rather walk.

Unfortunately, balance bikes can be super-pricey, unless you go for a cheap knock-off of the wooden ones, and those are meant for toddlers, and they’re not uber-durable.

Fortunately, being a DIYer means that not only can you figure out how to make something new using only what you already own, but it means that you can basically custom-build for yourself whatever you’re dreaming of. Here’s how my partner and I dismantled my kid’s existing pedal bike and turned it into a balance bike for her:

parts removed from the pedal bike to turn it into a balance bike
parts removed from the pedal bike to turn it into a balance bike

The trick to converting a pedal bike into a balance bike is to just keep taking stuff off of it until you’re left with two wheels and a frame. Here are the parts that you’ll probably run into:

chain guard: A kid’s bike is probably going to have a plastic cover over its chain. Unscrew everything that you can find to unscrew, and remove it.

pedals: There are more screws on this, and possibly a pin that you might need to loosen with a hammer before you can pull it out with pliers.

My partner knocks the crap out of the bike chain with a hammer until it breaks.
My partner knocks the crap out of the bike chain with a hammer until it breaks.

chain: You’ve got some options for removing this seemingly magically-attached part. You can take off the back wheel of the bike, then put it back later. You can find the little pin that forms the chain into a circle, and remove it. You can take the bike to a bike shop and get someone to use a chain breaker on it. Or you can be like my partner, and just knock the crap out of it with a hammer and a wedge until it breaks in half.As for that now-useless bike chain–make something crafty with it!

When everything non-essential is off the bike, re-adjust it to fit your kid. They’ll want to be able to sit on the sit and still touch the ground flat-footed, and the handlebars will need to be a comfortable height, as well.

There are a few differences between a balance bike designed from the ground up to be such and a converted balance bike like this one. The seat of a pedal bike isn’t perfectly comfortable for the type of leg movements that your kid will now be doing, but unless she’s had a lot of time on a toddler balance bike, she probably won’t even notice. The small toddler balance bikes also don’t offer the range of motion that a pedal bike does–it’s pretty impossible to tip over a toddler balance bike with a sharp turn, since the steering simply doesn’t allow for it, but your kid will be able to wreck just as epically on this converted balance bike as she can on a pedal bike, so now isn’t the time to get lazy about enforcing the helmet rule. And finally, toddler balance bikes are very light, but a steel-framed kid’s bike is heavy; your kiddo isn’t going to get it up to a dangerous speed even if she’s running it, but give her a hill to careen down, and the story changes.

She rides!
She rides!

Nevertheless, converting a pedal bike to a balance bike is a worthy project. My kid will actually get on hers now, for instance, with those much-loathed pedals removed, and she’ll bike around the park with us, and keep up without getting tired. We gave her a huge confidence boost and made our family outdoor time better without shelling out any extra money, took the pressure off her so she might actually WANT to learn to ride for real, and we’ve got a whole summer of garage sales and flea markets ahead of us to score her new pedal bike.

P.S. Got a littler kid and some scrap wood? Make them a wooden toddler balance bike from scratch!

7 thoughts on “How-to: DIY Balance Bike from a Kid’s Pedal Bike”

  1. We also have a 7 (and 1/2) year old that isn’t all that crazy about biking. Not sure why she’ll eagerly jump onto a horse that is 3 or more times bigger, faster, and more unpredictable, but hey, whatever. It’s an especially touchy subject here as the papa LOVES mountain biking and wants to take us along, but the kiddo isn’t ready.

    We converted her bike to a balance type at the end of last year (we just zip-tied the chain). It seemed to help. Maybe this year she’ll be ready to try the pedals again.

    Maybe.

      1. Hmm. The hubby did it all, so I’ll have to check with him before I give you false info, but I think you should be able to reassemble the bike. I’ll get back to you.

  2. Have been wanting to try this on an adult bike but don’t want to mess up my good regular bike. Thought of getting one from a garage sale and experimenting. Has anyone tried this?

    1. My only concern would be that adult bikes have parts that kid bikes don’t have–gears for shifting and hand brakes, in particular. I don’t know specifically how you’d take those off, but in theory, if you just keep removing parts, eventually you’ll be left with that plain bike frame.

  3. Here’s a tip, if your trying to take the chain off without the proper tool, try a set of bolt-cutters, they easily cut the chain and save a lot off time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top